Disrupted communication with your 123 HP DeskJet 2600 printer can result in the message: ‘Offline’ displaying on a screen while attempting to print. This issue can be resolved as follows:
STEP 1: Run HP Printer Offline Support and Scan Doctor and select Test Print to troubleshoot this problem.
STEP 2: Right-click your printer icon under Devices and Printers and select Set as Default Printer. Right-click the printer icon again and select See What’s Printing to open the print queue. Uncheck Pause Printing and Use Printer Offline and then attempt printing again.
STEP 3: Turn on the 123 HP DeskJet 2600 and disconnect the power cord. Plug the power cord back in, turn on your 123.HP.com setup DeskJet 2600 again and then attempt printing after confirming that the connection established between your printer and computer is working correctly.
STEP 4: Go to Devices and Printers and open the Printer Properties for your DeskJet 2600. Select the correct port type in the Ports tab and then attempt printing.
STEP 5: Attempt printing after updating your printer firmware.
STEP 6: Reconnect your HP DeskJet 2600 setup to the network and click Manual IP in the Network or Networking tab. Either enter your printer IP address or click Suggest a manual IP address button to automatically fill it out for you and then click Apply. Go to Devices and Printers and open the Printer Properties for your printer. Add a new Standard TCP/IP Port in the Ports tab. Attempt printing using this new port.
STEP 7: Remove all the devices listed for your DeskJet 2600 under Devices and Printers.
Open the HP Printer Support and follow the prompts to add a new printer to Devices and Printers. In Printer Properties, select the standard port you created and attempt printing.
STEP 8: Attempt printing after disconnecting from any guest or host network and reconnecting back to your own network.
STEP 9: Go to Utility to change the connection type to your printer and then attempt printing.
STEP 10: Remove your dj 2600 printer from Devices and Printers and then install a new driver for your printer.
STEP 11: Go to Devices and Printers and open the Printer Properties for your dj2600 printer. Select the port being used, in the Ports tab, click Configure Port and then uncheck SNMP Status Enabled. Re-enable SNMP if the problem remains unresolved. HP Printer Offline windows 10
STEP 12: Either turn off the IPv6 setting in the Advanced network settings menu on your printer control panel or search your printer IP address on your internet browser and select Enable IPv4 only in the Network or Networking tab.
STEP 13: Try connecting to your hp 2600 printer from another computer and attempt printing to make sure that the problem doesn’t rest with your computer.
STEP 14: Uninstall your HP printer software. Attempt printing, after restarting your computer and reinstalling the printer software.
For queries and assistance contact our 123 hp deskJet 2600 printer expert.
Need Help Call US 1-854-400-5545
We also Provide HP Printer offline, Brother Printer Offline, Canon Printer Offline, Epson Printer Offline, Lexmark Printer offline, Xerox Printer Offline Support at Printer setup services. Our Technical team 24*7 Ready to fix your HP, Brother, HP, Lexmark, Xerox Printers offline problems.